Vista Gold Corp. Surface Exploration Outlines Additional Gold Targets at Mt Todd

Vista Gold Corp. (“Vista” or the “Company”) today announced results of its most recent surface exploration program on two specific areas within the exploration licenses (“ELs”) at the Company’s Mt Todd gold project (“Mt Todd” or the “Project”). Both targets returned excellent anomalous gold assays from surface sampling, including up to 4.0 grams of gold per tonne (“g Au/t”) at the Irwins target.

Frederick Earnest, President and CEO of Vista Gold Corp., stated, “The ELs at Mt Todd encompass 1,650 km² and are largely underexplored. As part of our annual exploration program for the ELs, we collected more than 600 rock chips and soil samples from an area of interest covering ~ 1.6 km² on the Cullen-Australis Structural Corridor. The results demonstrate strong geologic similarities to the area in the mining licenses where we previously delineated four highly prospective exploration targets through our 2021-22 drilling program. We are encouraged by the tenor of these results, which reinforce our belief that the Mt Todd land package has tremendous discovery potential.”

Exploration License Potential

There are a significant number of known mineralization occurrences and indicators within the ELs. The ELs share several similarities to the Project mining licenses (“MLs”). The most important shared characteristics between the Batman-Driffield Structural Corridor (located on the MLs) and the Cullen-Australis Structural Corridor to the north and east on the ELs are similar structural controls, lithologies, alteration patterns, and granitic intrusions. Vista’s recent exploration drilling program highlighted the strong possibility that the four newly identified targets are structurally connected to the Batman deposit to the south and the Quigleys deposit to the north. Given the similarities seen between the two structural corridors and the number of mineralized occurrences on the ELs, the prospects of delineating deposits of similar scale and grade are highly encouraging.

Figure 1 shows the boundaries of the ELs and MLs, underlying geology, known mineral locations, predominant types of mineralization identified to date, and the two areas of interest (Irwins and Cullen West) within the Cullen-Australis Structural Corridor that were sampled during the 2022 annual ELs exploration program.

Vista’s 2022 ELs exploration program collected a total of 60 rock chip, 556 soil, and 19 stream sediment samples. We concentrated on two areas within the Cullen Australis Trend. Both areas showed encouraging anomalous metal values through previous widely spaced surface sampling programs. Additionally, these areas exhibit similar lithology, alteration, proximity to young granitic bodies, structure, and magnetic anomalies similar to those found at the Batman deposit.

2022 Soil Programs

Cullen West Area

Six lines of the 100x100m soil sampling program contained 121 samples as shown in Figure 2. Table 1 details the most significant gold assays, with the three highlighted rows showing the highest-grade samples.

Table 1 – Cullen West Most Significant Soils Samples Collected (2022 Program)

Irwins Area

The soil sampling program at Irwins consisted of 44 lines with samples collected on a 20x20m pattern. A total of 436 samples were collected. Some of the samples show a significant high-grade anomalous gold pattern that corresponds with high-grade copper, tungsten, and elevated bismuth and tellurium. At the Batman deposit, we see similar trends with the gold, copper, bismuth, and other sulfide metals. The highest two soil samples collected had gold grades of 3,953 ppb (3.953 g Au/t) and 1,281 ppb (1.281 g Au/t), respectively. Figures 4 and 5 provide greater detail on the Irwins soil sampling program. The RED lines are dolerite dike locations. The PURPLE lines show the locations of historic workings. As can be seen, the two parallel each other and the highest soil grades also align with these trends. The area in the southeast corner of the figure is shown with higher grades because of the presence of the dolerite dikes. Table 2 details the most significant soil samples collected.

Table 2 – Irwins Area Most Significant Soil Samples

Sampling Methodology

The sampling method and approach for the surface geochemistry and grab samples is as follows:

• Soil samples are planned on a regular grid and a sample sheet is generated.
• GPS is used to locate sample positions and a pelican pick is used to clear debris and any topsoil from the sample location 3.
• The hole is dug to the B horizon and 7 to 10 kg of soil is collected and coarse sieved to remove stones, etc.; a fine mesh is then employed and the entire sample recovered post sieving is bagged.
• Soil sampling is usually undertaken in the dry season; however, if wet samples are obtained, they are dried in the logging shed prior to sieving.
• Sample bags are calico and purchased pre-numbered; these are then packaged in groups of 5 for transportation to NAL, an independent ISO 9000 certified lab, Pine Creek, NT and Genalysis Laboratory Services Pty Ltd, Perth, WA, which is also independent from Vista.
• As the site is closed to public access, no special security measures are undertaken.
• A sample submission sheet is sent to the lab, detailing required methodology, and number of samples.
• No identifying data relating to sample location is recorded on the bags submitted or the paperwork beyond bag numbers.

Rock chip and soil geochemical samples are routinely collected to determine if the potential exists for anomalous gold values below the surface. The presence of anomalous gold grades is not a guarantee of subsurface mineralization. While both rock chip and soil samples have sampling procedures, it is not considered rigorous enough to be relied upon for use in the estimation of mineral resources. Surface soil and rock chip samples are merely considered to be potential indicators of subsurface mineralization. Since the rock chip and soil assays are not used in mineral resource estimation, it is rare that any additional QA/QC or check assaying would be completed. The data are used on an as received basis.

It is the QP’s (as defined below) opinion that the sample preparation methods and quality control measures employed before dispatch of samples to an analytical or testing laboratory ensured the validity and integrity of samples taken.

John Rozelle, Vista’s Senior Vice President, a Qualified Person (“QP”) as defined in accordance with subpart 1300 of Regulation S-K under the United States Securities Exchange Act of 1934, as amended (“S-K 1300”) and by Canadian National Instrument 43-101 – Standards of Disclosure for Mineral Projects (“NI 43-101”), has verified the data underlying the information contained in and has approved this press release. The information contained in this press release does not change any of the mineral resources or reserves estimates contained in Vista’s technical report summary entitled “S-K 1300 Technical Report Summary - Mt Todd Gold Project - 50,000 tpd Feasibility Study – Northern Territory, Australia” with an effective date of December 31, 2021, an issue date of February 9, 2022 and an amended date of February 7, 2023 available on EDGAR or the technical report entitled “NI 43-101 Technical Report - Mt Todd Gold Project - 50,000 tpd Feasibility Study – Northern Territory, Australia” with an effective date of December 31, 2021 and an issue date of February 9, 2022 available on SEDAR.

The information contained in this press release is provided to inform the reader of the growth of our geologic understanding of the Project. There has been insufficient exploration to define a mineral resource with respect to the exploration target areas and it is uncertain if further exploration will result in the exploration target areas being delineated as a mineral resource.