May 30 2013
Galane Gold Ltd. ("Galane Gold" or the "Company") is conducting a long term exploration programme over a large number of prospects contained within its mining leases and exploration tenements which cover the bulk of the Tati greenstone belt in Botswana.
The Company is pleased to provide an update concerning on-going exploration work at the Company's Tekwane Prospect ("Tekwane") to define gold mineralisation found in a flat-lying quartz rubble bed within the soil profile, close to surface. The Company's news release dated December 3, 2012 disclosed details regarding the first phase of this work.
Through a regional program completed by a predecessor to the Company in 2002 a gold-in-soil geochemical anomaly, called Tekwane, measuring 2.6 km X 1.0 km in size was shown to exist but no further exploration work was completed at that time. Tekwane is located approximately 11 km by main road from the Company's processing plant at the Mupane Mine, just to the north of the Archaean Tati greenstone belt in Botswana. It is covered by Prospecting Licence 101/2011 held by the Company's wholly-owned subsidiary The Northern Lights Exploration Company (Pty) Limited.
Pit Excavation Results
The 420 pits from which the sample results have been received cover an area measuring roughly 2.5 km X 1.0 km shown in the map below. Within this area are some 120 pits carrying auriferous quartz rubble of above 0.50 grams per tonne of gold ("g/t Au."). covering approximately 1.0 square kilometre. Sample grades include values of:
- Pit ID TKPT029 43.47 g/t Au. (reported previously);
- Pit ID TKPT030 39.71 g/t Au. (reported previously);
- Pit ID TKPT056 30.50 g/t Au. (reported previously);
- Pit ID TKPT386 78.00 g/t Au.;
- Pit ID TKPT083 22.71 g/t Au.;
- Pit ID TKPT133 12.02 g/t Au.; and
- Pit ID TKPT197 10.31 g/t Au.
In addition, a further 11 pits assayed in the 5.0 to 10.0 g/t Au range, and 65 more pits assayed in the 1.0 to 5.0 g/t Au range.
Overall, 120 pits (of the 420) have yielded an average sampled width of 0.24m with grades shown in the tabulated summary of all pit results which is attached to this release as Schedule "A".
Philip Condon, Galane Gold's CEO stated "The completion of this stage of the exploration program on Tekwane is very exciting for Galane in that we are building on the potential in both the quartz rubble horizon and the source of the auriferous quartz. The quartz rubble is free digging and less than 2 metres below the surface and represents a possible low cost mining and simple processing deposit in itself. In addition, the methodical exploration program we are executing is designed to maximise the possibility of finding the bedrock source of the auriferous quartz."
Work Conducted
The program of work commenced in March of 2012 and the first phase of 72 pits was reported in December of 2012. A further 348 pits (for a total to date of 420 pits) have been excavated and form the basis of this release. This program is now completed and has "found the limits" of the auriferous quartz rubble horizon at Tekwane.
The method of exploration is to excavate pits by a mechanical backhoe. This was done on a systematic grid with pits every 50m along lines that are 100m apart. The average depth is 1.5m, exposing the full soil profile, which contains an auriferous quartz rubble horizon, and into the underlying bedrock. Pits are logged and the quartz rubble and bedrock exposures are sampled in detail. To date 420 pits have been dug and sampled, while another 218 infill pits are being excavated as the final stage. These allow for a selective infill such that the grid will be 50m X 50m in the important areas. Finally, continuous trenches will be excavated selectively between the 50m pits to allow for evaluation of continuity. This density of pits and the continuous trenches are expected to form the basis of a resource estimate that is compliant with National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101").
Overall, our pitting work to date has shown that the auriferous quartz rubble horizon appears to be the cause of the geochemical anomaly. This has helped define the objectives of the exploration program, which are twofold: (i) to evaluate the quartz rubble horizon in the pits and to ascertain its continuity, and (ii) to determine the source of the quartz rubble.
The detailed logging and sampling of the bedrock exposed in the pit bottoms remains inconclusive at this stage, although a pattern is emerging which will be better defined by the 50m infill pits currently being dug.
Laboratory Methodology and Quality Assurance
All samples summarised in this news release and shown in the related tables were collected by personnel of the Company under the supervision of senior staff and a qualified person, as defined by NI 43-101. Each collected sample weighs roughly 4 kg and employees transported these samples to the independently run sample preparation facility operated by Genalysis Laboratory Services Pty Ltd ("Genalysis"). The facility prepares samples for analysis (the samples are crushed and milled with 90% passing through 75 microns) and ships them to the Genalysis laboratory in Johannesburg, South Africa, where the gold is determined by a fire assay of a 50 gram sample.
The Genalysis laboratory is registered to ISO 9001:2001 and has received ISO/IEC 17025 accreditation. In addition to the internal QA-QC program used by this accredited laboratory, the Company also maintains an independent QA-QC program that includes the use of certified standard reference materials, blanks, as well as field duplicates. The quality control data associated with these results falls within acceptable ranges for all relevant parameters.
This news release has been prepared under the supervision of Mr.Charles Byron, Pr. Sci. Nat., MAusIMM., MGSSA, who has verified the data disclosed, including sampling, analytical and test data underlying the technical information contained herein. Verification included a review of the quality assurance and quality control samples, and review of the applicable assay databases and assay certificates. Mr.Byron has more than 25 years relevant industry experience and is a BSc Honours graduate in Geology. He is the Chief Geologist with the Company and serves as the qualified person as defined by NI 43-101.